A860-0302-T001
尊敬的客戶您好！如果曾經有一個人為了你而等待，不管是三年還是三個月，請不要那樣輕率地選擇拒絕。于這茫茫人海中，每天有多少的相遇擦肩而過，每天又有多少的匆匆擦肩而過。而緣分，讓你我相遇。期待您的來電！珍惜這得來不易的緣。
聯系人：鄭阿清
★主營品牌：AB、ABB、GE、施耐德、本特利、西屋、英維斯、HIMA等
◆我們售出的產品都經過專 業的測 試和認 證
◆互惠互利，共創雙贏！
廈門興銳嘉進出口有限公司坐落于美麗的鷺島——廈門?。。?/strong>
廈門興銳嘉進出口有限公司連接到的服務
從當天交貨到采購解決方案，找到一系列有用的服務來提高生產率，節省您的時間和金錢。
獲得所需的支持，以使您的采購流程盡可能高效。我們經驗豐富的團隊將在這里幫助您整合備品備件，消除復雜性并減少流程中的時間浪費。
手 機：18106937709（微信同號）
QQ: 3007272972
A860-0302-T001
Simulation of state feedback PID control
Let,, be, KC = [188.8458329.2705159.7069,22.8667], k = [0.06659, 3.6134, 4.8962, 2.9486, 0.6659]
The beters of the first stage regulator are: KP = 0.08, I = 50s
The beters of the second stage regulator are: KP = 1.0, I = 0.0s
4.2.1 comparison of state feedback PID control and PID cascade control system
The beters of the first stage regulator of PID cascade control system are: KP = 1, I = 25s
The beters of the second stage regulator are: KP = 1.0, I = 0.0s
Fig. 3 is the response curve of the fixed value when the unit step disturbance occurs.
It can be seen from Figure 3 that the control effect of the state feedback PID control system is obviously better than that of the traditional PID cascade control system
Fig. 3 Comparison of response characteristics between state feedback PID control and PID cascade control
4.2.2 change the time constant T 0 of the observer (other beters remain unchanged)
When t0 = 5, 8, 10, 15, the set value disturbance response of the system is shown in Fig. 4. From Figure 4, we can see the perbance of the state feedback PID control system when the model is mismatched. When the time constant t0 of the observer is less than the time constant T2 (10s) of the inertia region, the response of the system is accelerated, but the smaller t0 is, the greater the overshoot appears. When t0 is greater than T2, the system response becomes slower. It should be noted that when the difference between t0 and T2 is large, the system response becomes worse. Therefore, in practical application, the time constant t0 of the observer can be made as a function of the load to adapt to the change of the time constant T2 in the inert region. If the variation range of T2 is within 20%, it can be considered that t0 is a constant.
Fig. 4. Response curves of the system with different observer time constants
4.2.3 change the gain K0 of the observer (other beters remain unchanged)
When K0 = 1.0, 1.1, 1.2, 1.5, the set value disturbance response of the system is shown in Fig. 5. It can be seen from Fig. 5 that the system is not sensitive to the change of K0, and the variation range of the inert region gain of the actual system is basically between 1.1 and 1.5.
A860-0302-T001
1747-SN
1755-A6
1756 CPU蓋子
1756-BATM
1756-DHRIO
1756-DHRIO
1756-DHRIO
1756-DNB
1756-DNB
1756-IB16I/A
1756-L1
1756-L1M2
1756-L1M2
1756-L542
1756-L55
1756-L55M13
1756-L55M13
1756-L55M13
1756-L55M13
1756-L55M14
1756-L55M14
1756-L55M16
1756-L55M23
