CV-M4+ (LVDS)
-
2/3" monochrome progressive scan
-
1380 x 1030 active pixels
-
24 frames/sec.
-
6.45 μm square pixels
-
Configuration via RS-232C
-
LVDS interface
|
The CV-M4+ megapixel camera is an updated version of CV-M4. It features double-speed readout and digital LVDS EIA-644 output widely used by digital image acquisition boards. Based on 10 bit A/D technology, the CV-M4+ utilizes proprietary sample and hold and correlated double sampling (CDS) techniques to achieve double-speed readout without trade-offs in dynamic range or image fidelity.
Dimensions (HxWxL): 40 x 50 x 100 mm
CV-M4+CL
-
2/3" monochrome progressive scan
-
1380 x 1030 pixels
-
24 frames/sec.
-
6.45 μm square pixels
-
Configuration via serial interface
-
Camera Link interface
|
The CV-M4+CL is a 1.4 megapixel progressive scan monochrome camera suitable for a wide range of machine vision applications. It features several special functions ideal for Inbligent Traffic Systems (ITS) applications. The camera outputs 24 full frames/second. Higher frame rates are possible by using partial scan and vertical binning.
Based on 10 bit A/D technology, the CV-M4+CL utilizes proprietary sample and hold and correlated double sampling (CDS) techniques to achieve double-speed readout without trade-offs in dynamic range or image fidelity.
Dimensions (HxWxL): 40 x 50 x 100 mm
CV-M40
-
1/2" monochrome progressive scan
-
60 full frames/second
-
1/2 and 1/4 partial scan
-
Three external trigger modes
-
Set-up by RS 232C or switches
|
The CV-M40 is a monochrome double speed 1/2" progressive scan camera providing 60 full frames per second and up to 233 frames per second with partial scanning.
The combination of partial scanning and double speed readout with progressive scan sensors opens up new possibilities of inspection and measurement tasks.
The camera can be set up by RS 232C or external switches, and includes three external trigger modes, vertical binning, and a frame delay readout mode. Applications include surface inspection, servo loops and motion analysis.
Dimensions (HxWxL): 40 x 50 x 80 mm
CV-A10GE
-
1/2” monochrome progressive scan camera
-
768 x 576 active pixels
-
8.37μm square pixels
-
60 fps with full resolution
-
AGC and Auto-exposure
-
Unique Sequencer function
-
Programmable GPIO
-
Comprehensive SDK for Windows XP
-
GigE Interface
|
The CV-A10GE is based on the CV-A10CL camera, using a monochrome progressive scan 1/2" CCD sensors with 768 x 576 pixels resolution. The 1/2" bat has the advantage of a large pixel size (8.37 x 8.37 μm), which results in higher sensitivity.
The camera features a unique Sequencer Function, allowing on-the-fly change of shutter/gain from frame to frame.
The b factor of makes this camera well suited for wide range of applications with industrial factury automation, inbligent traffic systems (ITS) and medical applications.
Dimensions (HxWxL): 55 x 55 x 55 mm
CV-A11
-
1/3" monochrome progressive scan
-
648 x 492 active pixels
-
S/N ratio >56 dB
-
Programmable exposure
-
Partial scanning
-
Frame-delay readout
-
RS 232C control
-
Analog interface
|
The CV-A11 has a footprint of merely 44 x 66 mm (b x length) and height of 29 mm and boasts a long list of new functions and features. These include RS 232C control of all settings of the camera, a number of new trigger modes and readout modes. The target market for this camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).
Dimensions (HxWxD): 29 x 44 x 66 mm
CV-A20CL
-
2/3" monochrome
-
1920 x 1080 active pixels
-
60 fps with full resolution
-
Rolling shutter
-
Snap-shot trigger mode
-
Sync for external light source
-
Low power dissipation
-
Vertical b of interest
|
CV-A33CL (Discontinued)
-
Quad speed
-
User selectable b-of-interest for high speed
-
Global Shutter for progressive scan operation
-
1/2" CMOS image sensor
-
Camera Link digital interface
-
Pulse Width Control trigger mode
|
CV-A436
-
Remote head
-
1/3" progressive scan
-
VGA resolution
-
60 full frames/sec.
-
Asynchronous reset
-
17 mm diameter head
-
2 meter cable
-
Several asynchronous trigger modes
|
The CV-A436 is a remote micro head camera (17 mm dia.) with a 1/3" monochrome progressive scan CCD sensor and with features similar to the CV-A11. The small and lightweight head makes it ideal for applications with space or mass constraints, such as semiconductor equipment or robotics. The camera features a standard frame rate of 60 fps with programmable exposure, shutter speeds from 1/60 to 1/200,000 second, partial scanning, and other features. The camera head is connected to the controller by a 2-meter detachable cable.
Head dimensions: Ø17 x 46 mm
CCU dimensions (H x W x L): 29 x 44 x 66 mm
CV-M10SX C
-
1/2" monochrome progressive scan
-
8.3m square pixels
-
25 frames/sec full frame
-
Asynchronous reset
-
High speed shutter
-
Internal/external HD/VD sync.
-
RS 232C set up
|
The CV-M10SX C is the successor of the popular CV-M10BX C and CV-M10RS C cameras with a resolution compatible with the SVGA bat.
The camera is a 1/2" progressive scan camera that offers a superb image quality in versatile applications such as machine vision, high speed video capturing, pattern recognition, etc.
All camera settings are done via an RS 232C interface or by DIP switches on the rear panel.
Dimensions (HxWxL): 40 x 50 x 80 mm
CV-M10SX E
-
1/2" monochrome progressive scan
-
8.3m square pixels
-
25 frames/sec full frame
-
Asynchronous reset
-
High speed shutter
-
Internal/external HD/VD sync.
-
RS 232C set up
|
The CV-M10SX E is the successor of the popular CV-M10BX E and CV-M10RS E cameras with a resolution compatible with the SVGA bat.
The camera is a 1/2" progressive scan camera that offers a superb image quality in versatile applications such as machine vision, high speed video capturing, pattern recognition, etc.
All camera settings are done via an RS 232C interface or by DIP switches on the rear panel.
CV-M2CL
-
1" monochrome progressive scan
-
1600 x 1200 active pixels
-
7.4μm square pixels
-
30 frames/second (dual tap mode) with full resolution
-
17 frames/second (single tap mode) with full resolution
-
Digital Camera Link interface
-
PIV and ITS modes
-
Selectable 10 or 8 bit output
|
The CV-M2CL is a two megapixel, 1600 x 1200 pixel, progressive scan 1" monochrome camera, providing up to 30 frames per second over a Camera Link interface.
An auxilliary output provides analog composite video output for a CCIR/EIA monitor.
7.4 μm square pixels offer high sensitivity. Other features include partial scanning, programmable shutter speeds, and a PIV mode for consecutive short exposures with a short time interval. Several unique functions, such as burst trigger, restart continuous trigger (RCT) and automatic lens iris control, make the CV-M2CL ideal for Inbligent Traffic Systems (ITS) applications, as well as typical industrial and medical uses.
Dimensions (HxWxL): 40 x 50 x 120 m
