| 詳細參數 | |||
|---|---|---|---|
| 品牌 | MOTOROLA | 型號 | VMIVME-7750-746000 |
| 結構形式 | 模塊式 | 安裝方式 | 控制室安裝 |
| LD指令處理器 | 硬PLC | 加工定制 | 否 |
VMIVME-7750-746000
說到控制系統很多人貌似說得頭頭是道，繼續深究下去，什么是控制器，什么是PLC，什么是DCS，什么是FCS？三兩句話介紹完基本概念后，頓時語塞，怎么聊都感覺枯燥生硬有朋友可能會問什么是組態？其實組態就是搭建系統軟件和硬件環境，再簡單地說，組態就是用已有的簡單功能組合出更復雜的功能。
那上下位機又是什么呢？舉個例子：設想自己開發一個控制系統。首先要做的是告訴計算機自己想干什么，然后由計算機通知控制器，最后控制器再告訴執行器具體該怎么做。這里面我其實只跟計算機發生對話，這里的計算機就是上位機，接受計算機指令的控制器就是下位機。
其實計算機和控制器本質上說都是計算機，只是外在表現形式，應用環境和編程方式的差異，導致我們必須采取一些便于理解的命名方式。上位機要跟人互動，所以偏重GUI，有顯示器或觸摸屏、鼠標和鍵盤燈外設等人機交互設備。下位機要跟執行機構互動，所以偏重算法，人們要把需求編寫成可執行的程序下載到下位機，上位機給出的指令觸發下位機程序執行，下位機更像是一個黑盒子，執行過程中人們無法直觀的看到每一個過程和步驟，只能對結果進行分析，對不對，準不準，好不好Distributed Control System-->DCS（分布式控制系統），因為DCS也是控制系統，遵循控制系統的基本形態，也有上下位機，也要進行軟件和硬件組態。Distributed分布式是講DCS這個控制系統的特點和差異化。因此我們要搞明白什么是DCS就要從分布式這個特點開始。
Repeater can be first a Supplicant and later Authenticator. A smaller difference is that the Access Protocol Packet may convey not only success or failure inbation but also indication of a failed dialog. The authentication dialog allowed by IEEE802.1X/EAP allows for the use of both shared secrets and certificates. This solves the problem of OPERA1 Phase1 of authenticating only on a MAC address basis.
The new specification of OPERA is quite similar to the IEEE 802.11i and it complies with the RSNA (Robust Secure Network Association) defined in it. Nevertheless, the multihop nature of PLC, as shown in Figure 1, is a major difference with respect to wireless. In fact IEEE802.11i does not take into account the possible existence of repeaters.
What the OPERA specification does, is to apply recursively the dialog between Supplicant and Authenticator.
A node is first Supplicant and, once admitted into the network, may become Authenticator for another Supplicant. This creates a chain of trust among devices onto which security relies upon. What happens is that the messages sent by the Authenticator to the AS are transmitted over the PLC network and, thus, should be protected with encryption and integrity mechanisms as well as the data messages.
In agreement with IEEE802.11i, OPERA Phase 2 uses the EAPOL 4-way handshake for key management. The bive of this handshake is to prove mutual knowledge of the PMK (Pairwise Master Key). But prior to this handshake, the PMK has to be transferred to the Authenticator and this again has to be done by means of the secure channel bed by the mentioned chain of trust.
ABB 3BSE008538R1
ABB TB850
ABB TK851V010
ABB DO810
ABB 200900-004
ABB 35AE92
ABB 3ASC25H203
ABB 3ASC25H204
ABB 3BHB003689
ABB 3HAB3700-1
ABB 3HAB8101-8/08Y
ABB 3HAC025466-001
ABB 3HAC031683-001
ABB 3HAC14550-2/09A
ABB 3HAC14550-4/04B
ABB 3HAC17326-1/02
ABB 3HNA000512-001
ABB 3HNE 00313-1 TILLV.0317 機器號：64-25653
ABB 3HNE00313-1（含10米線及插頭）
ABB 61615-0-1200000
ABB AI610
ABB AI625
ABB AI835
ABB AO610
ABB AX411/50001
ABB BB510(DC5256)
ABB BRC300
